Quercus (Canvas) Rubrics

Quercus (Canvas) Rubrics allow instructors to communicate assessment expectations, evaluate student work, and provide feedback using defined criteria. Rubrics can support consistency in grading, help students understand what is expected of them, and identify strengths and areas for improvement.

Instructors can use rubrics with Assignments, graded Discussions, and Quizzes. Rubrics may include performance levels and point values, or be used to provide feedback without calculating grades.

Designing Rubrics for Learning

Before creating a rubric, consider what students should demonstrate and how the rubric will support the assessment’s learning outcomes.

Rubrics can serve several purposes:

  • Clarifying expectations: Communicate the criteria students should consider when completing an assignment.
  • Supporting learning: Help students monitor their progress and reflect on the quality of their work.
  • Providing feedback: Identify strengths, areas for improvement, and possible next steps.
  • Supporting grading: Apply assessment criteria consistently across submissions and, where appropriate, among multiple graders.
  • Guiding peer and self-assessment: Provide a shared set of criteria for reviewing work and discussing learning.

Understanding Rubric Components

Rubrics typically organize assessment expectations into criteria, with optional performance levels, descriptions, and point values. Understanding these components can help instructors choose an approach that aligns with their assessment.

  • Criteria: The aspects of student learning being evaluated, such as critical analysis, use of evidence, organization, or communication.
  • Performance levels (ratings): Categories describing different levels of achievement, such as Excellent, Good, Adequate, Marginal, and Inadequate.
  • Descriptions: Explanations of what performance at a particular level looks like. These can help clarify expectations but do not need to be written for every rating.
  • Points: Numerical values assigned to criteria or performance levels. Instructors can use predefined values, point ranges, or enter scores directly when grading.

For example, a Critical Analysis criterion might be worth four points. An instructor could define performance levels from Excellent (4 points) to Inadequate (0 points), or enter a score directly and provide individualized feedback without detailed descriptions for each level.

The University of Toronto’s grading scales and notations provide terminology that instructors may draw on when developing performance levels. The point values in the example above are illustrative and are not prescribed by the University.

Regardless of the approach, students should understand what they are expected to demonstrate and how their work will be evaluated. Clear criteria, assignment instructions, and examples can help communicate these expectations.

Choosing a Rubric Approach

Enhanced Rubrics allows instructors to choose how they structure a rubric and whether it will support scoring, feedback, or both.

  • Criteria with defined ratings: Use performance levels with point values and optional descriptions.
  • Criteria with flexible scoring: Enter earned points directly for each criterion and provide comments without developing detailed performance-level descriptions.
  • Unscored rubrics: Assess student work against criteria without assigning numerical scores through the rubric.
  • Written Feedback rubrics: Organize qualitative feedback around assessment criteria.

In Canvas, Scale and Written Feedback are rubric types, while Scored and Unscored are separate scoring settings. For scored Scale rubrics, instructors can select ratings or enter points directly during grading.

Whether a rubric determines the assignment grade is configured separately when attaching it to an assessment.

Getting Started with Quercus Rubrics

Quercus includes a built-in Rubrics tool, accessible through the Rubrics area in Course Navigation. Instructors can create rubrics for individual assessments or reuse them across multiple activities.

Quercus uses Enhanced Rubrics, which provides an updated interface for creating, viewing, editing, and managing rubrics. Instructors can:

  • Create rubrics with assessment criteria, ratings, and point values.
  • Choose between Scale and Written Feedback rubric types.
  • Configure scored or unscored rubrics.
  • Search, sort, duplicate, and archive existing rubrics.
  • Review where rubrics have been used across courses and assessments.
  • Preview rubrics before using them.

Rubrics can be created from the course Rubrics area or while setting up an assessment.

For technical instructions, consult Canvas LMS’s How do I add a rubric in a course using Enhanced Rubrics? and How do I manage rubrics in a course using Enhanced Rubrics? guides.

Creating and Managing Rubrics

To create a rubric in Quercus:

  1. Open your Quercus course and select Rubrics from Course Navigation.
  2. Select the option to create a new rubric.
  3. Enter a descriptive rubric name.
  4. Choose the rubric type and scoring settings appropriate for the assessment.
  5. Add criteria, including descriptions and point values where applicable.
  6. Add or modify performance ratings, descriptions, or point ranges as needed.
  7. Preview the rubric and save it.

Instructors can preview a rubric before saving it or save it as a draft while developing assessment criteria. Enhanced Rubrics also allows instructors to duplicate and reorder criteria, adjust the display and order of ratings, and align criteria with Canvas Outcomes, where configured.

Enhanced Rubrics also supports importing and exporting rubrics, which can help instructors share or reuse assessment criteria. Instructors should review imported rubrics before using them, particularly their criteria, ratings, and point values.

For detailed instructions and interface examples, consult Canvas LMS’s Enhanced Rubrics creation guide.

Managing and Reusing Rubrics

Once created, rubrics are saved in Quercus for future use. Enhanced Rubrics allows instructors to search, sort, duplicate, and archive rubrics, making it easier to manage rubrics across assessments.

Instructors can reuse an existing rubric when assessment criteria are similar, or duplicate a rubric to adapt it for a different assignment. For example, an instructor might use a common set of writing criteria across several assignments while adjusting expectations for different stages of a course.

Important: Canvas restricts editing rubrics that are associated with more than one assessment. Instructors can create a copy when changes are needed. Review rubric settings carefully before grading begins, since changes made after student work has been assessed can affect grading consistency and results.

For instructions, consult Canvas LMS’s Managing rubrics using Enhanced Rubrics.

Using Rubrics with Assessments

Instructors can attach rubrics to Assignments, graded Discussions, and supported Quizzes in Quercus. Depending on the assessment and rubric settings, rubrics can communicate expectations, guide feedback, or contribute to grading.

Adding a Rubric to an Assessment

Instructors can create a new rubric or select an existing one when configuring an assessment.

When adding a rubric, review the available settings, particularly Use this rubric for assignment grading.

  • When enabled: Canvas uses the rubric assessment to calculate the assignment grade in SpeedGrader.
  • When disabled: Instructors can use the rubric to evaluate student work without automatically updating the assignment grade.

When a rubric is not used for assignment grading, instructors can also choose to hide the total rubric score from students while keeping individual criterion scores visible. This can be useful when providing criterion-based feedback without emphasizing an overall numerical score.

If the rubric’s total points differ from the assignment’s points, Canvas displays a warning and provides options for addressing the difference.

For instructions, consult Canvas LMS’s Adding a rubric to an assignment using Enhanced Rubrics and Adding a rubric to a graded discussion.

Rubrics can also be associated with quizzes, although grading workflows may differ between Classic Quizzes and New Quizzes. In New Quizzes, instructors should complete question-level grading before assessing the rubric, since subsequent quiz score updates may overwrite the rubric-based grade. Consult Canvas LMS’s Adding a rubric to a quiz.

Sharing Rubrics with Students

Consider making rubrics available before students begin an assessment so they can review the criteria, understand expectations, and use the rubric to guide their work.

Rubrics can also support classroom activities such as discussing examples, evaluating sample work, or inviting students to assess their own progress.

When sharing a rubric, explain how it will be used, particularly whether it will determine the assignment grade or provide feedback independently.

The way students view rubrics may differ from the instructor’s Enhanced Rubrics interface, depending on the features enabled in Quercus.

Reviewing Rubric Settings Before Grading

Before using a rubric for assessment, review its settings and confirm that they align with your grading intentions.

Consider the following:

  • Scoring: Determine whether the rubric will assign points or provide feedback without scores.
  • Assignment grading: Confirm whether the rubric should calculate the assignment grade.
  • Point totals: Check that rubric and assignment points align, or understand how differences will be handled.
  • Performance levels: Review rating values, point ranges, and descriptions for accuracy and clarity.
  • Student access: Confirm that students can access the rubric and understand how it will be used.
  • Reuse and editing: Review whether the rubric is associated with other assessments before making changes.

Avoid making changes to rubric criteria, point values, or grading settings after grading has begun. Changes may affect existing assessments or create discrepancies between rubric scores and assignment grades.

Grading and Providing Feedback with Rubrics

Quercus rubrics can be used in SpeedGrader to evaluate submissions and provide feedback.

Depending on the rubric configuration, instructors can:

  • Select a predefined performance rating for each criterion.
  • Enter earned points directly, including values within a defined point range.
  • Add comments explaining strengths and areas for improvement.
  • Use an unscored rubric to assess work without assigning points.
  • Calculate an assignment grade from rubric scores when the appropriate grading setting is enabled.

When using point ranges, selecting a rating initially assigns the highest value in the range. Instructors can enter a different point value within the range when assessing student work.

Direct point entry allows instructors to evaluate each criterion and provide individualized feedback without relying on predefined performance ratings. Criterion-level comments can help students understand their strengths, areas for improvement, and possible next steps.

To grade with a rubric:

  1. Open the assessment in SpeedGrader.
  2. Select the student’s submission and open the rubric.
  3. Review the work against each criterion.
  4. Select the appropriate rating or enter a point value, where applicable.
  5. Add criterion-level comments to provide feedback.
  6. Submit the rubric assessment and review the resulting grade in SpeedGrader and the Gradebook, where applicable.

For detailed instructions, consult Canvas LMS’s Using a rubric to grade submissions in SpeedGrader.

When multiple instructors or teaching assistants are grading, discuss how criteria and performance levels will be interpreted before assessment begins. Reviewing sample submissions together can help establish shared expectations and identify areas where further clarification is needed.

Instructors can bulk download rubric assessments from the Gradebook, including completed and incomplete assessments. They can also import updated rubric assessments using a CSV file, provided the information matches the rubric’s criteria, ratings, and point values. Consult Canvas LMS’s Downloading rubric assessments and Importing rubric assessments guides.

Viewing Rubrics

Enhanced Rubrics offers three display options when assessing student work in SpeedGrader:

  • Traditional view: Displays criteria and performance ratings in a grid, allowing instructors to review the rubric as a whole.
  • Horizontal view: Presents ratings in a more compact horizontal layout, reducing the space needed to display rubric information.
  • Vertical view: Arranges ratings vertically, providing an alternative layout that may be easier to navigate when grading.

Horizontal view supports up to five ratings per criterion. Rubrics with more than five ratings display vertically.

Instructors can switch between views using the rubric view menu in SpeedGrader. Changing the view affects only how the rubric is displayed, not its criteria, ratings, or point values. The selected view remains in place while moving between student submissions but resets when SpeedGrader is refreshed or reopened.

For detailed instructions, consult Canvas LMS’s Using a rubric to grade submissions in SpeedGrader with Enhanced Rubrics.

Last Modified:

18 November, 2026

Back to Top