Quercus (Canvas) Gradebook

The Quercus (Canvas) Gradebook allows instructors to record, organize, calculate, and communicate grades for course assessments. It brings together grades from Assignments, graded Discussions, and Quizzes, and provides tools for managing grading workflows, monitoring progress, and sharing feedback with students.

Instructors can use the Gradebook to support transparent assessment practices, apply grading rules consistently, and help students understand their progress throughout a course.

Important: Final grades are not to be published in Quercus. Official final grades are only distributed to students from the University Registrar’s Office via ROSI/ACORN.

Planning Gradebook Calculations

Before entering grades, consider how the Gradebook will reflect your course’s assessment structure, learning outcomes, and grading policies. Assessment point values, weighting, and grading rules affect how Quercus calculates student grades.

Assignment Groups and Weighted Grades

Quercus uses Assignment Groups to organize graded assessments and, where appropriate, calculate weighted course grades.

For example, an instructor might organize assessments into the following groups:

Assignment Group Weight
Participation 10%
Quizzes 20%
Written Assignments 30%
Final Assessment 40%
Total 100%

Within each weighted group, individual assessments contribute according to their point values. For example, an assignment worth 20 points contributes twice as much as an assignment worth 10 points within the same group, assuming both are included in the calculation.

To configure weighted grades:

  1. Open Assignments in your Quercus course.
  2. Create Assignment Groups that reflect your course’s assessment structure.
  3. Move each graded assessment into the appropriate Assignment Group.
  4. Select the Options menu (three vertical dots) at the top of the Assignments page, then select Assignment Groups Weight.
  5. Select Weight final grade based on assignment groups.
  6. Enter the percentage weight for each Assignment Group, ensuring the total equals 100%.
  7. Select Save to apply your settings.

Instructors can also configure Assignment Group rules to drop a specified number of the lowest or highest scores. These rules require careful review, particularly when assessments have different point values or students have missing grades.

Confirm that the Gradebook’s weighting and calculation rules align with the course syllabus. Review the configuration before grading begins, particularly when using dropped-score rules or alternative assessments.

For detailed instructions, consult Canvas LMS’s How do I weight the final course grade based on assignment groups? guide. For additional examples of weighted-grade calculations in Quercus, consult Arts & Science’s Setting up Grade Weighting for Assignments and Quizzes guide.

Understanding Ungraded, Missing, and Zero Scores

Quercus distinguishes between assessments that have not been graded and assessments assigned a score of zero.

  • Ungraded: No grade has been entered. The Gradebook generally excludes ungraded assessments from current grade calculations.
  • Missing: A submission has not been received by the expected deadline, where Canvas can determine submission status. A missing status does not necessarily mean a zero has been assigned.
  • Zero: A recorded grade of zero that contributes to grade calculations.
  • Excused: An assessment excluded from the student’s grade calculation.

For example, if a student has earned 80% on the only graded assessment so far, their current calculated grade may display as 80%, even if other assessments remain ungraded. This does not necessarily represent their final course grade.

Quercus offers several ways to work with ungraded assessments:

  • View Ungraded as Zero: Preview how calculated totals would change if ungraded assessments received zeros, where enabled in Quercus. This changes the instructor’s view without assigning actual grades.
  • Apply Score to Ungraded: Apply scores to eligible ungraded assessments in bulk, where this feature is enabled.
  • Set Default Grade: Assign a specified grade to students who have not yet received a grade for a particular assessment, with an option to overwrite existing grades.
  • Manual entry: Enter a grade directly into an individual Gradebook cell.

These options serve different purposes. Instructors should distinguish between previewing calculations and making actual changes to student grades, particularly when using weighted Assignment Groups or dropped-score rules.

For instructions, consult Canvas LMS’s Viewing ungraded assignments as zero guide.

Grading Schemes and Letter Grades

Quercus supports different grade display types, including points, percentages, complete/incomplete, GPA scales, and letter grades. Instructors should select display options that align with the assessment and applicable divisional grading practices.

Important: The default Canvas grading scheme does not align with the University of Toronto’s grading schemes. Using letter grades in Quercus Gradebook or SpeedGrader can result in grading discrepancies. Instructors should review CTSI’s Letter Grades in Quercus resource before configuring or entering letter grades.

The University’s grading scales and notations provide additional institutional guidance.

Getting Started with the Gradebook

The Gradebook is accessible through Grades in your Quercus course navigation. It displays students in rows and graded assessments in columns.

Gradebook columns are generated from published graded Assignments, Discussions, and Quizzes. Instructors can enter grades directly in the Gradebook or use SpeedGrader to review submissions and provide feedback.

For an overview of the interface, consult Canvas LMS’s How do I use the Gradebook? guide.

Entering and Updating Grades

To enter a grade manually:

  1. Open Grades in your Quercus course.
  2. Locate the appropriate student and assessment.
  3. Select the Gradebook cell.
  4. Enter or update the grade, then press Enter or select outside the cell to save the change.

The Grade Detail Tray provides additional options for reviewing an individual assessment, changing a grade or submission status, adding comments, and opening SpeedGrader.

For detailed instructions, consult Canvas LMS’s Entering and editing grades in the Gradebook guide. For more information about reviewing submissions and providing feedback, consult CTSI’s Quercus (Canvas) SpeedGrader resource.

Creating Gradebook Columns

In Quercus, Gradebook columns are created through graded assessments rather than added directly to the Gradebook.

For assessments completed outside Quercus, such as in-person examinations, presentations, or participation activities, instructors can create an Assignment with a No Submission or On Paper submission type. Consult Canvas LMS’s How do I create assignment columns for non-submission assignments in the Gradebook? guide.

Once the Assignment is published, its column appears in the Gradebook, allowing instructors to enter grades manually.

Viewing Student Information

The Gradebook allows instructors to search for students, change the display order of names, and show secondary information such as course sections or student identifiers.

These options can help instructors locate student records, manage grading across sections, and match Gradebook information with authorized institutional records.

Organizing and Managing the Gradebook

The Gradebook includes tools for organizing assessment columns, locating student records, and managing grading workflows.

Sorting, Searching, and Filtering

Instructors can customize their Gradebook view by:

  • Sorting students: Arrange students by name or other available criteria.
  • Arranging columns: Organize assessments by name, due date, point value, module, or manual order.
  • Sorting assessment results: Organize individual assessment columns by grade or submission status.
  • Filtering: Display selected course sections, Assignment Groups, student groups, modules, submissions, or date ranges.
  • Saving filter presets: Create reusable filters for frequently accessed groups or assessment categories.
  • Searching: Locate individual students or assessments.

These features can be particularly helpful in large courses or when instructors and teaching assistants manage different sections. For additional guidance, consult CTSI’s Considerations for Large Courses resource.

For technical guidance, consult Canvas LMS’s Creating and managing Gradebook filters guide.

Gradebook Views, History, and Notes

Quercus provides several ways to review grading information:

  • Traditional Gradebook: Review grades for multiple students and assessments in a spreadsheet-style view.
  • Individual Gradebook: Focus on one student or assessment at a time.
  • Gradebook History: Review recorded grade changes to help investigate discrepancies.
  • Notes: Maintain private instructor-facing notes about students, where the Notes column is enabled.

Gradebook History is useful for reviewing changes, but it should not replace institutional record-keeping practices. Instructors should avoid recording unnecessary personal or sensitive information in the Notes column.

Communicating with Students

The Gradebook’s Message Students Who feature allows instructors to contact students based on assessment-related criteria, such as students who have not submitted an assignment, whose work has not been graded, or whose scores fall above or below a specified value.

This can support timely reminders, follow-up after assessments, and opportunities for students to seek assistance. Although instructors can message multiple students at once, each student receives an individual message.

Messages should be supportive and specific, with clear information about any actions students may need to take. For instructions, consult Canvas LMS’s How do I send a message to students from the Gradebook? guide.

Managing Late and Missing Submissions

Quercus provides tools for identifying late or missing submissions and applying grading rules. These settings should reflect the course’s stated assessment policies and any applicable institutional and divisional requirements.

Late and Missing Submission Policies

Instructors can configure Late Policies through the Gradebook settings.

Available options include:

  • Missing Submission Policy: Automatically assign a specified percentage to eligible missing submissions.
  • Late Submission Policy: Apply a percentage deduction for each day or hour an eligible submission is late, with an optional minimum grade threshold.

These policies apply at the course level rather than to individual assessments. Automatic missing submission policies generally apply to eligible online assignments. Other submission types, including No Submission, On Paper, and some external-tool assessments, may require manual grade or status changes.

Late submission policies can affect previously graded work, and disabling a policy does not automatically remove penalties already applied. Canvas also rounds partial days or hours up when calculating lateness. Review approved extensions and individual circumstances before enabling automatic deductions.

Canvas Late Policies are technical grading settings, not University of Toronto grading policies. Instructors should consult applicable institutional and divisional guidance and communicate late or missing submission expectations clearly in the course syllabus and assessment instructions.

Default Grades, Bulk Scoring, and Exceptions

Instructors may need to assign grades to multiple students, record zeros for missing work, or manage individual exceptions.

Depending on the situation, they can:

When applying default or bulk grades, review the options carefully to avoid overwriting existing scores.

Instructors should account for approved extensions, accommodations, alternative assessments, and other individual circumstances before applying automatic deductions or zeros.

Managing Grades and Feedback Visibility

The Gradebook controls when students can access grades and associated feedback. Instructors should establish their intended approach before grading begins and communicate when students can expect results.

Grade Posting Policies

Manual Grade Posting is the default configuration in Quercus. This means grades and associated feedback are generally hidden from students until the instructor posts them.

Two posting policies are available:

  • Manual: Grades and associated feedback remain hidden until posted by the instructor.
  • Automatic: Grades and associated feedback become visible as they are entered or submitted.

Posting policies can be configured at the course or individual assignment level. Assignment-level settings override the course-level policy.

Gradebook column headings include indicators that help instructors identify manual posting policies and unposted grades. Review these indicators before releasing assessment results, particularly when multiple instructors or teaching assistants are grading.

For instructions, consult Canvas LMS’s Using posting policies in a course guide.

Posting, Scheduling, and Hiding Grades

When using manual posting, instructors can release grades and comments once they are ready for students.

Important: When instructors post grades to Everyone under a manual posting policy, future grades for that assignment will be posted automatically. To release only completed grades while keeping subsequent grades hidden, select Graded. Review the posting options carefully when additional submissions or grading changes are expected.

Quercus also provides options for scheduling the release of grades and comments, including releasing them together or on separate schedules. When using separate schedules, comments must be released before grades.

Scheduled release dates are not preserved when copying or importing course content. Instructors should review and configure release schedules each time they prepare a course. Manually posting grades before a scheduled release overrides the schedule.

The Hide Grades option is different from manual posting. It hides grades that have already been posted but should not be used as a substitute for establishing a manual posting policy before grading. Hiding previously posted grades does not undo information students may already have accessed or received through notifications.

For detailed instructions, consult Canvas LMS’s Selecting a grade posting policy for an assignment and Posting grades for an assignment guides.

Understanding What Students Can Access

Students can access their own grades and feedback through the Grades area in Quercus, subject to course settings and posting policies.

Depending on the assessment, students may be able to review:

  • Assessment grades and submission statuses.
  • Instructor comments and document annotations.
  • Rubric feedback.
  • Assignment Group totals and calculated grades, where available.
  • What-If Scores, which allow students to explore how hypothetical assessment results might affect their calculated grades.

What-If Scores do not change actual grades. Instructors can explain this distinction when helping students interpret their progress.

Grade posting policies do not control every form of student access. For example, New Quizzes has separate settings governing when students can review quiz results, and peer review comments may remain visible even when assignment grades are hidden.

For additional U of T guidance, consult UTM’s Gradebook: What Students See resource.

Restricting the Display of Numerical Grades

Quercus allows instructors to restrict students’ access to numerical grades, displaying letter grades and feedback instead. This option may be useful when instructors want to emphasize performance levels rather than points or percentages.

This setting relies on the course grading scheme. Instructors should configure an appropriate U of T grading scheme before enabling it, as Canvas’s default scheme does not align with the University’s grading schemes. Some quiz results may still display numerical information.

For instructions, consult Canvas LMS’s Restricting the View of Quantitative Data guide and CTSI’s Letter Grades in Quercus resource.

Reviewing, Exporting, and Importing Grades

Instructors should review Gradebook calculations and maintain accurate records throughout the term, particularly before submitting official final grades.

Checking Grade Calculations

Before relying on Gradebook totals, confirm that:

  • All graded assessments are included in the appropriate Assignment Groups.
  • Assignment Group weights match the course syllabus.
  • Missing, ungraded, excused, and zero scores are handled correctly.
  • Dropped-score rules and alternative assessments produce the intended calculations.
  • Any manually adjusted grades have been reviewed for accuracy.
  • Grade posting settings and student access reflect the intended visibility of assessment grades, feedback, and calculated totals.

Remember that Quercus may calculate a current grade using only graded assessments, which can differ from a calculation that treats all remaining work as zero.

Exporting and Importing Gradebook Data

The Gradebook allows instructors to export grades as a CSV file for review, record-keeping, or authorized offline grading workflows.

To export grades, open Grades, select Export, and choose the appropriate Gradebook export option.

Instructors can also import a CSV file to update grades or add assessment columns, subject to Canvas’s import requirements.

CSV imports can update existing grades or create new assignments, which are automatically published. However, imports cannot change submission statuses, comments, or grade posting policies, and changes to calculated columns are ignored. Instructors should review the import preview carefully before confirming changes.

New assignments created through CSV imports are placed in the default Assignments group. Instructors using weighted Assignment Groups should review and move these assessments to the appropriate group after importing.

When working with CSV files:

  • Retain the required student identifiers and column information.
  • Review grades and calculations before importing.
  • Confirm that imported grades appear correctly in Quercus.
  • Avoid overwriting existing grades unintentionally.
  • Store and share files containing student information securely, following University guidance.

Consider exporting a backup of the Gradebook periodically, particularly before substantial changes or at the end of the term.

For additional practical recommendations on managing grades, including maintaining Gradebook backups, consult UTM’s Top 5 Gradebook Tips & Timesavers. For detailed instructions, consult Canvas LMS’s Exporting grades from the Gradebook and Importing grades into the Gradebook guides.

Preparing Grades for Official Submission

The Gradebook can help instructors calculate and review assessment results, but Quercus is not the University’s official final-grade publication system.

Before submitting final grades through the authorized divisional process, instructors should review their Gradebook calculations, confirm applicable grading policies, and follow divisional procedures for grade submission.

Official final grades are communicated to students through ACORN following the University’s grade approval processes.

For an example of a divisional grading workflow, consult Arts & Science’s Grading from Start to Finish guide. Instructors should follow the final-grade submission procedures established by their own division.

For additional guidance, consult your divisional teaching and learning support office and the University of Toronto’s University Assessment and Grading Practices Policy.

Last Modified:

18 November, 2026

Back to Top