Plagiarism Review – Turnitin

Conditions of Use at the University of Toronto

The Plagiarism Detection Tool Conditions of Use statement is available in Quercus courses for instructors to copy and paste in the course syllabus.

On the Quercus course home page, navigate to the right-hand sidebar menu (under Course Status) and click on the Plagiarism Detection button:

The Conditions of Use are also listed below:

CONDITIONS OF USE AT THE UNIVERSITY OF TORONTO
The use of University’s plagiarism detection tool by our instructors is completely voluntary. Those wishing to use the University’s plagiarism detection tool in their courses must adhere to the following conditions of use:

1. University’s plagiarism detection tool is a tool that will assist in detecting textual similarities between compared works. Instructors must exercise their independent professional judgment in, and assume responsibility for, determining whether a text has been plagiarized or not.
2. Instructors must include the following passage (as is) on the course outline at the start of the class. Please note that the statement cannot be altered in any way.
   “Normally, students will be required to submit their course essays to the University’s plagiarism detection tool for a review of textual similarity and detection of possible plagiarism. In doing so, students will allow their essays to be included as source documents in the tool’s reference database, where they will be used solely for the purpose of detecting plagiarism. The terms that apply to the University’s use of this tool are described on the Centre for Teaching Support & Innovation web site (https://uoft.me/pdt-faq)”.
3. Students are permitted, under our conditions of use, to opt-out of using the University’s plagiarism detection tool. If a student chooses not to submit their assignment through the University’s plagiarism detection tool, instructors will need to find alternative arrangements to check their work as rigorously. (It should be noted that very few students choose to opt out.) Students cannot be penalized for choosing to opt out. If students choose to opt out, they should let their instructor know well in advance of submitting their paper. Ideally, they should communicate this during the first class, when the instructor is reviewing the course outline. In this case, you may ask them to submit all of their rough work for an assignment or you may have a short meeting with them and ask pointed questions about their research methodology. Instructors should not be asking students to do anything that might be perceived as additional work. We ask that instructors consult with the Centre for Teaching Support & Innovation when establishing these alternatives.

For information on alternative methods to submitting to Plagiarism Detection see this page from the Centre for Teaching Support and Innovation (CTSI).

Note: The Plagiarism Detection Tool is an integrated tool in Quercus. Using the Turnitin website directly is not supported at U of T.

Navigate to Assignments in the course menu and Click the blue +Assignment button to create a new assignment. Add the assignment title and directions. Then edit the assignment details as follows:

1. From the Submission Type drop-down menu, select Online
2. Under Online Entry Options, select  File Uploads.  File Upload is recommended for assignment submissions.
3. Select Restrict Upload File Types to restrict submissions to specific file types. Enter a list of accepted extensions, separated by commas (see Plagiarism Detection File Types and Sizes)
4. From the Plagiarism Review drop-down menu, select Turnitin Plagiarism Framework.

Using the Plagiarism Detection Tool for Existing Assignments

If no student submissions have been received, assignments that have already been created (or imported from another course) can be edited to use the Plagiarism Detection Tool.

1. Select the existing assignment and go to Edit from the top of the page
2. Navigate to the Plagiarism Review drop-down menu, Open the drop-down menu, choose Turnitin Plagiarism Framework
3. Save your settings

Note: If  some student submissions have already been received for the course under Ouriginal and you want to keep them, please download them from Ouriginal before the September transition.

We recommend that you note the date of the switch from Ouriginal to Turnitin so that you can track how assignments were submitted.

Customize Plagiarism Detection Settings

For best results, use the following settings:

1. Store submissions in: Select Institution paper repository from the drop-down menu. This option ensures that the student submissions for your assignment are stored in U of T’s paper repository for comparison with future student papers.
   Do not store the submitted papers means that after the similarity check has been performed on the submission, the file will not be stored in U of T’s paper repository.

   The Standard paper repository is not available at U of T.

2. Compare submissions against: Ensure all four options have been checked.
3. Similarity Report: Leave all options unchecked. Note: It is not recommended to Exclude Sources when creating an assignment. If necessary, these sources can be excluded from within the Similarity Report itself.
4. Save Turnitin settings: Select Save as default settings to make these selections the default settings for future Turnitin assignments in the course.
5. Show report to students: Choose whether students can view their Similarity Report by selecting one of four options:
   • Immediately: Students can view the report on submission (as soon as it is generated by Turnitin)
   • After the assignment is graded: Students can view the report as soon as it has been graded in Quercus.
   • After the due date: Students can view the report as soon as the assignment due date passes.
   • Never: Students cannot view the report at any time. Instructors will be able to see the report after students submit the assignment.

More details about Settings is available at Turnitin settings | Canvas Plagiarism Framework.

Grade Posting Policy and Plagiarism Detection Similarity Reports

With the new Grade Posting Policy for the Gradebook, Similarity Reports for assignments using the Plagiarism Detection Tool will be available to students according to the Similarity Report visibility settings selected for the assignment, regardless of the selected Grade Posting Policy or the visibility status of the grades (i.e. whether or not they are posted).

Assignment Availability and Due Dates

For each paper submitted, the Plagiarism Detection Tool generates a Similarity Report. The dates you set in Quercus affect when assignments are submitted to the Plagiarism Detection Tool and when Similarity Reports are generated.

Navigate to the Assign to menu at the bottom of the Assignment Details  page to set:

1. Due : date and time the assignment is due
2. Available from: date and time the assignment will become available
3. Available to:  date and time the assignment will no longer be available

Common Scenarios with Due and Available to dates

Plagiarism Detection File Types and Size Guidelines

If an assignment is set to allow any file type, Turnitin will accept any file that:

• is less than 100MB
• is less than 800 pages

If an assignment is set to allow only files that Turnitin can check for similarity, Turnitin will only accept files that can generate Similarity Reports. This includes:

• files less than 100MB,
• files with a minimum of 20 words
• file less than 800 pages
• Microsoft Word (DOC and DOCX)
• Corel WordPerfect
• HTML
• Adobe PostScript
• Plain text (TXT)
• Rich Text Format (RTF)
• Portable Document Format (PDF)
• OpenOffice (ODT)
• Hangul (HWP and HWPX)
• Powerpoint (PPTX)
• Google Docs via Google Drive

For more details about the types of files that will generate a Similarity Report, see Turnitin File Types and Size Guidelines .

Note for a Text Entry, the Turnitin score/report will only be shown attached to the first submission. Subsequent Text Entry submissions will generate an Turnitin report, but the new report(s) will continue to be shown attached to the first submission. Ideally, multiple Text Entry submissions should be avoided, especially if you would like students to view their report, as students are only able to view their most recent submission.

Editing Imported Assignments

Assignments that have been imported from another Quercus course will retain the settings from the previous course.  If a different Plagiarism Detection Tool was used in the previous course (for example, Ouriginal was available before September 2024), the new assignment settings will need to be edited to select Turnitin Plagiarism Framework.

1. Select the existing assignment and go to Edit from the top of the page
2. Navigate to the Plagiarism Review drop-down menu, Open the drop-down menu, choose Turnitin Plagiarism Framework
3. Save your settings

Similarity Reports

Text Similarity Overview

For each paper submitted, the Plagiarism Detection Tool generates a Similarity Report. The similarity score is a percentage of a paper’s content that matches to Turnitin’s databases or on the web. For the first submission, the report is normally generated within 5-10 minutes of submission. Similarity Reports for the second or subsequent submissions will take up to 24 hours to generate.

Similarity Reports do not indicate whether a student has plagiarized. They help to identify sources that contain textual similarities in submitted papers. Instructors must use their own judgement to determine if plagiarism has occured.

The Plagiarism Detection Tool automatically excludes papers submitted to the same assignment in the same class by the same student.  Instructors can access each submission in the SpeedGrader.

To access a Similarity Report for a submission navigate to SpeedGrader from Assignments or the Gradebook to view student submissions.  For detailed instructions, go to Accessing the Similarity Report | Canvas Plagiarism Framework (turnitin.com).

View the Similarity Report

For more information on Classic View Similarity Reports, see Turnitin’s page on Interpreting Similarity Reports

For an overview, read Understanding Turnitin and the Similarity Report (PDF) from U of T’s Centre for Teaching Support and Innovation.

Exclude Full Sources

Excluding Sources from the Analysis

Applying filtering options to an individual Analysis Report allows you to exclude sources that you do not want the submission to match against. In certain cases, this may provide a clearer similarity index (percentage).  It is not recommended to Exclude Sources when creating an assignment.

To exclude individual sources from the analysis, view the Sources tab from the Analysis Overview.  View the Location in Document of individual sources and choose whether or not to Include in Analysis.  The default is for sources to be included in the analysis.

Exclude Small Sources 

This option can be used to exclude sources that are less than a certain number of words or a certain percentage of words (e.g. to exclude commonly used phrases in a specific discipline).

1. Select the Filters and Settings icon (funnel) in the red similarity toolbar.
2. From the Filters and Settings side panel, use the radio and text boxes to exclude sources that are less than a certain number of words or sources that are less than certain percentage match. For example, filtering by 3 words will exclude all sources with a cumulative match word count that is less than 3 words. Filtering by 10% will exclude all sources that have a match of less than 10%.
3. Select Apply Changes to confirm.

Exclude Quotes and Bibliographies

This option can be used to exclude quoted materials and bibliographies from the Similarity Report, especially where students in the same class are working on the same topic and may use similar reference lists and quotes in their submissions.

1. Select the Filters and Settings icon in the red similarity toolbar.
2. From the Filters and Settings side panel, use the check boxes to exclude quoted and/or bibliographic material.
3. Select Apply Changes to confirm.

Viewing and Restoring Excluded Sources

Excluded sources can be viewed and restored if needed. The restored sources will automatically update the Similarity Report and will be reflected in the similarity score (percentage). These changes will not be reflected in the Similarity Score Icon in the SpeedGrader.

1. To view excluded sources, click on the red Excluded Sources icon (a circle with a line through it) in the red icon group .
2. To restore individual excluded sources
   1. click on the check-box next to the source you’d like to restore, and
   2. click the Restore button
3. To restore all excluded sources click the Restore All

For Group Assignments in Quercus – if multiple students submit the same document to a Group Assignment in Quercus, the submissions may match against each other at 100 percent. It is strongly advised that if multiple copies of the same document need to be submitted, it should be done by the same student.

For a Text Entry, the Turnitin score/report will only be shown attached to the first submission. Subsequent Text Entry submissions will generate an Turnitin report, but the new report(s) will continue to be shown attached to the first submission.

Ideally, multiple Text Entry submissions should be avoided, especially if you would like students to view their report, as students are only able to view their most recent submission.

Academic Integrity Support Contacts

Instructors who have questions about the process for the handling of suspected academic offences should contact their department/division (in many cases this would be the undergraduate chair or associate chair/dean).

In addition, divisional offices (or individuals) are also available to provide advice regarding particular academic integrity issues or to discuss a specific situation. These include:

• Protocols for Academic Integrity-related Data Requests
• Academic Integrity at the University of Toronto
• Office of Student Academic Integrity (OSAI). at the Faculty of Arts and Science (FAS): osai.artsci@utoronto.ca
• School of Graduate Studies: General Inquiries at graduate.information@utoronto.ca
• U of T Mississauga: Lucy Gaspini, Manager, Academic Affairs, Office of the Dean
• U of T Scarborough:  Nisha Panchal, Student Conduct and Academic Integrity Officer

Plagiarism Detection Tool issues and system outages will be posted on:

• U of T System Status  (check here first for Plagiarism Detection Tool updates, scheduled maintenance and status reports, included under Academic Toolbox)
• Plagiarism Detection Tool Status for Turnitin and explanation of Status Codes
• Turnitin Status History
• Turnitin Canvas Plagiarism Release Notes

Student Documentation

Student Quercus Support Resources: Turnitin (includes information about Submitting an assignment and Viewing a Similarity Report)

Troubleshooting Issues

Similarity score not updating after the due date within the SpeedGrader

It has been reported that some submissions within SpeedGrader are not updating after the due date passes, meaning that a different similarity score may appear when opening the Feedback Studio from the SpeedGrader.

If the settings for an Assignment using Plagiarism Detection are modified to exclude information from the Similarity Report (e.g., bibliography or quotes) this may affect the Similarity score. The new score within the Plagiarism Detection Tool Feedback Studio may not be automatically pushed to the Quercus Gradebook.  If you have further questions email Quercus Help at q.help@utoronto.ca.

For more information visit Turnitin Integrations Known Issues.